Eleaf iStick Nowos Kit Review - Test With Chubby Bubble Vapes Bubble Purp E-juice

Have you paid any attention to Eleaf iStick Nowos Kit? I think Eleaf iStick Nowos Vape Mod Kit is one of the best vape mod kits designed for you which consists of the iStick Nowos mod and the ELLO Duro atomizer.

The iStick Nowos looks to be revolutionary due to its innovative LED display. It shows vape data in large white font on a black background. Vape data on the screen includes indicators for current wattage, current resistance, battery charge level and much more.

You will get a maximum output of 80W from the mod and there is an internal 4400mAh battery – which when you compare to a 18650 battery usually around 2500-3000mAh is pretty decent.

The charging system's micro USB port is located on the side and it is a Type C USB interface that supports QC3.0/PD3.0 charging protocols. As a result, the iStick Nowos Box Mod only takes one hour and 20 minutes to charge, whereas the same charging process would take two and a half hours with a QC 2.0 cable.  The mod allows for three modes of charging: DC5V/2A, DC9V/2A and DC12V/1.5A.

To ensure vaping on the Eleaf iStick Nowos is always safe, the unit is made with a wide range of safety features. These include temperature protection during charging, short circuit protection, 10 second over puff protection, over-current protection, over-discharge protection and overcharge protection.

As for the Ello Duro Tank, it uses the latest mesh coil heads for maximum vapor output with tons of flavor.The vape tanks measures 28mm x 54mm, has a weight of 57 grams and can hold 6.5ml of vape juice in its reservoir.  The top cap slides open to reveal a juice port making refills a breeze.

Airflow is located on the bottom utilizes dual air slots that produce massive vapor and excellent taste, especially while working in combination with the mesh coils that power the tank.  Available coils include the HW-M 0.15ohm head and the HW-N 0.2ohm Head that utilize kanthal heating elements.

Parameters
iStick Nowos Mod
Size: 43mm x 28mm x 83mm
Power Range: 5-80W
Battery: Built-in 4400mAh Battery
Battery Type: 18650
Resistance Range 0.1-3.0ohm
Output voltage: 9V max
Charging: 3A QC
Thread: 510 thread

ELLO Duro Tank
Size 28mm *54mm
Capacity: 6.5ml
Coil Type: HW-M Dual 0.2ohm Head(Pre-installed); HW-N Dual 0.2ohm Head
Thread: 510 thread

So how do you like the nowos vape? Today I will recommend you the Chubby Bubble Vapes Bubble Purp E-Juice for you to vape with the Eleaf iStick Nowos. I believe you must love this flavor.

Bubble Purp by Chubby Bubble Vapes has been one of the most sought-after sweets flavored ejuice in the entire vaping industry. Sweet and chewy bubblegum flavored with imported concord grapes from Italy offers the perfect cloud of bubble bursting enjoyment!

Parameters
Size: 60ml
Nicotine Avail: 0mg, 3mg, 6mg,12mg

To get the Chubby Bubble Vapes Bubble Purp E-Juice, it just cost you $12.90. Wow! It's so cheap.

Freemax Twister Kit & Joyetech ULTEX T80 Kit | Same Wattage For Option

Guys, today let me show you two best vape pen kits in 2018 - Freemax Twister Kit and Joyetech ULTEX T80 Kit, both of which can fire up to 80W. Now let's make a comparison between the two vape pen kits, so which one do you like better?

The Freemax Twister 80W Starter Kit is a stick device, consisting of the Twister 80W variable wattage built-in battery tube mod and the Fireluke 2 mesh coil sub ohm tank. Freemax Twister 80W Starter kit is powered by 2300mah built-in battery with twist-style variable wattage function, so a simple twist of the base then you can easily switch the output wattage from 5W to 80W, the easiest way of its kind.

The Freemax Twister chip has a host of protective measures like short-circuit protection and low-power protection, meanwhile, the LED light embedded inside the firing button indicates the various working conditions. The water transfer printing graffiti setup appearance makes it look highly recognizable from other stick pen-style starter kit.

The Fireluke 2 is the updated version of the original Fireluke M, with the X2 Mesh Coil and X3 Mesh Coil, slide to open top fill design, 360 degree eliquid feeding, 90% flax cotton & 10% cotton formula, so the Fireluke 2 offers a stylistic design and great flavor compared to all the other mesh coils and sub ohm tanks in the market.

Overall, the Freemax Twister 80W Starter Kit is a sleek, portable, and simple package for beginners who want a quick start into vaping.

Parameters
Freemax Twister Battery
Size: 24.7mmx 101.6mm
Battery: 2300mAh
Wattage Range: 5W-80W
Voltage Range: 0.5-9V
Resistance Range: 0.1ohm-3.0ohm
Power Efficiency: 95%
Thread: 510

Fireluke 2 Tank
Size: 24mm x 47.8mm
Capacity: 5ml
Material: Stainless steel/ Glass tube
Drip tip: 810 drip tip

The Joyetech ULTEX T80 Vape Kit features a mechanical tube inspired design that allows for a maximum output wattage of 80 watts and supports multiple temperature control modes. The ULTEX T80 features a stealth mode along with a preheat function for immediate satisfaction. The ULTEX T80 is powered by one high amp 18650 battery that may be charged via the micro USB charging port. A battery LED light inside the fire mechanism will flash to notify you how much voltage is left in the battery and whether or not it is time for a recharge.

In fact, the T80 can operate as a mechanical mod by putting the device into bypass mode.  And, there also is a power mode, a temperature control mode with nickel, titanium & stainless steel and a TCR mode which stands for Temperature Coefficient of Resistance. TCR allows for entering the custom resistance settings for your particular coil. In temperature and TCR modes, the device can achieve 600 degrees Fahrenheit with any atomizer in the range of 0.05 to 1.5ohm.

Also included in the ULTEX T80 Kit is the Cubis Max tank. It is unique in that it works with a coil-less design that utilizes an NCFilm Heater that is much easier to clean that can be easily cleaned, has a long lifespan and makes cotton replacement an absolutely effortless process. The heating element of the NCFilm heater is constructed of Kanthal and is horizontally oriented for easy horizontal building to achieve big vapor with exquisite flavor. 

The juice reservoir is not a bulb style glass, yet it can still hold up to 5ml of e-liquid. Designed with a refill system, the top cap easily slides open to expose a large fill port that you can squirt juice into. At the bottom of the top cap is also where two air inlets are located. These can be widely adjusted and, because of their location, prevent leakage.

Parameters
Size: Φ28.0*138.5mm
Battery using: single high rate 18650 cell (CDR ≥ 25A)
E-liquid capacity: 5.0ml
Heater: Joyetech NCFilmTM heater (Kanthal)
Screen: 0.49 inch OLED display
Output: 1-80W
Modes: POWER/BYPASS/TEMP(NI/TI/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode, 0.05-3.5ohm for POWER mode

Now Freemax Twister Kit and Joyetech ULTEX T80 Kit are sold on Vapesourcing for you to order one. I think they will be the best choice also in 2019.

Which Mod For Choice? Voopoo Drag 2 Or VOOPOO DRAG 157W？

Today let's see the Voopoo Drag 2 Mod again. The Drag 2 still looks, feels and operates like the original Drag, which is a great start. This time, they’ve added a plastic lens in front of the screen, modified the magnetic battery door, updated the resin color options, changed the chip format a bit, raised the wattage limit to 177w from 157w, made the device as a whole smaller, and my favorite part, they made it more comfortable to hold, so what the similarities and difference between this two vape mods from the same manufacturer of Voopoo?

On the control face, you will see a crystal clear OLED display with a menu that displays the current battery level, mode, resistance or voltage, and wattage. The biggest highlight is that the Voopoo Drag 2 Mod is constructed with a 32 bit US GENE.FIT Chip from the world's largest provider of eCig chips.

The newest version of the well loved fast firing GENE chip – the GENE Fit. Apparently the chip is also sealed against Dust, Fire and Liquid. GENE FIT chip includes the new FIT mode – which is apparently like a set of presets I think for the UForce tanks to prevent from burn out.

The GENE.FIT Chip is dynamic and quite efficient with battery efficiency, with the addition of multiple output power adjustments such as Flavor Set, Cloud Set, and Battery Set, so you can achieve the best vaping.

Parameters
Size: 62*51*26.5mm
Material: Stainless Steel+Resin
Power Range: 5-177W
Battery: 2* 18650 Batteries ( Not Included )
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance Range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Thread: 510

Next, it's the VOOPOO DRAG 157W Vape Mod, which is a dual 18650 powered mod compatible with the VOOPOO PC App for full customization and fine tuning settings. The chassis of the DRAG made from zinc alloy and has a carbon fiber accent panel on one side and the word DRAG lightly etched into the battery access door.

The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and a firing speed of 0.025 seconds! The VOOPOO DRAG is a highly efficient variable wattage box mod with a chip efficiency rating of 95% for accurate and reliable power output.

The DRAG is compatible with the VOOPOO PC App which allows the user to customize settings and add a customized logo to the display. You can always keep the mod up-to-date with upgradeable firmware too so you will never miss anything new. The VOOPOO DRAG 157W TC Box Mod is ideal for users looking for some serious power output with minimal fire delay for that SUPER DRAG!

Parameters
Size: 90*54*24mm
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Output Power: 5-157W
Temperature Range:200-600F/100-315C
Supports 2pcs 18650 batteries ( not included )
Material: stainless steel

>> Click here to get the Voopoo drag 2 Mod kit. Want to save more, enter here to get christmas vape sales.

Geekvape LUCID Kit Matching with Jam Monster Apple For Best Flavor

If you are a fan of Geekvape, you will be excited that GeekVape company has launched their newest vape mod kit - GeekVape Lucid Kit, which consists of GeekVape Lucid Mod and GeekVape Lumi Tank with ergonomic design and compact size for easy to hold in hand. And Jam Monster Apple E-Juice will be the best choice for GeekVape Lucid Vape Kit.

Powered by the advanced AS chipset, Lucid is a compact and powerful mod that is capable of outputting a maximum power of 80W. Geekvape LUCID Kit 80W is the most compact starter kit powered by a single 18650 with OLED display screen that offers a concise and clear interface. Micro USB port is for a safe USB charging with removable battery, and it can also be used for firmware updates.

The LUMI is a 24mm pre-coiled sub ohm tank that is powered with Geekvape supermesh coil system (non-replaceable) to produce the best flavor and outstanding vapor production. The tank is built with FDA certified medical grade Polycarbonate which can withstand extremely high temperature and Stainless Steel and only weighs 16g. With the Supermesh coil system, Lumi can produce outstanding flavor and vapor production.

Parameters
Output: 80W
Mesh Coil
Resistance: 0.3ohm
Output: 30-45W

I think the best vape juice is also necessary in your daily vaping life. Today I recommend you the Jam Monster Apple E-Juice for Geekvape LUCID Kit. So do you want to have a try?

Apple Jam Monster is one of the freshest new flavors you've ever tasted. Prominent Apple Butter Jam balanced with creamy butter and toast. Jam Monster is a perfect breakfast blend you won't be able to get enough of, even in 100 ml bottles. Jam Monster is jam packed with flavor. No wonder it is a top selling e juice.

If you haven't tasted the first two flavors of Jam Monster, the reviews pretty much speak for themselves. Jam Monster is a winner and this new Apple flavor does not sway from their origins.

Parameters
Size: 100ml
Nicotine Avail: 0mg, 3mg, 6mg

So do you think Jam Monster Apple E-Juice can bring you perfect flavor when you are vaping with Geekvape LUCID Kit. Want to have a try? So please go to Vapesourcing online vape shop to get them.

Can Freemax Mesh Pro Tank Match Joyetech Espion Tour Mod Perfectly?

Recently, Joyetech has released their newest Joyetech Espion Tour Kit, and you may be attracted by its charming appearance. The Joyetech Espion Tour Box Mod can fire up to 220W, and now I choose the Freemax Mesh Pro Tank to match this mod, so do you think they can match with each other perfectly?

Design-wise, the Joyetech Espion Tour Vape Mod is quite compact with dimensions that come in at only 48mm x 33mm x 89.0mm. On one large side of the the mod, there’s a 0.96 inch OLED display with intuitive menu. The side of the device features an oval shaped ergonomic fire button while a 510 threaded connection is located at the top.

With a maximum of 220 watts of output, the Espion Tour by Joyetech can operate in power mode, temperature modes (Ni, Ti, SS) and a TCR mode for custom heating element resistance settings. A myriad of safety features includes dual circuit protection, timeout protection, overcharge protection and short circuit protection

The mod utilizes two 18650 batteries which are accessed via a bottom battery panel. You may charge the cells while they are inside the mod by plugging the Espion Tour into any wall outlet. The charging process is fast with 2 amps of current. The charging port also doubles as a firmware upgrade interface in case that a new operating system is released by Joyetech.

Parameters
Size: 48.0*33.0*89.0mm
Battery using: dual high rate 18650 cells (CDR ≥ 25A)
Screen: 0.96-inch OLED display
Output: 1-220W
Modes: POWER/TEMP(NI/TI/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode
0.05-3.5ohm for POWER mode
Max charging current: 2.0A
Max output current: 50A
Max output voltage: 9V

The Freemax Mesh Pro is a remarkable sub-ohm tank, with its 6 mL capacity bubble, Sliding top fill cap and high-wattage mesh coil. Its mesh coils are made up of flat metal films, this unique design enhances the heating surface area, producing more even heat and extraordinary vapor. And now there are single/double/triple mesh coils for you to chose.

The Mesh Pro's large airflow slots and wide bore drip tip, produce smoother vapor, delicious flavor and enormous clouds. The Mesh Pro’s appearance is just as phenomenal as its performance, it features a shimmering metallic finish that looks amazing on any device! If you wanna take a shot at mesh coiled tank and keep only one, this is it!

Parameters
Diameter: 25mm
Pyrex Glass: 5mL Standard E-Juice Capacity / 6mL Optional E-Juice Capacity
Thread: 510


The features about the Joyetech Espion Tour Box Mod and Freemax Mesh Pro Tank are above, so do you want to order them for a full kit? And they are sold on Vapesourcing online vape store for you to order.

Vandy Vape Pulse Dual Kit VS Vandy Vape Pulse X Kit | 220W Or 90W for Choice

Today I will show you the newest Squonk vape kit - Vandy Vape Pulse Dual Kit with compact size, but this vape kit can fire up to 220W, so it’s amazing. When you see the Vandy Vape Pulse Dual Kit at the first time, you may also remember the Vandy Vape Pulse X Squonk Kit because they look like the twins.

Vandy Vape Pulse Dual 220W Squonk TC Kit with Pulse V2 RDA is the smallest dual battery squonk mod, which features ergonomic design is easy to hold in hand, and It is also easy to operate when you hold it in the hand.

Powered by dual 18650 batteries and capable of 220W maximum output, Vandy Vape Pulse Dual Kit equipped with upgraded Vandy chip to offer excellent and utmost quality. It uses top-grade IC at an affordable cost to the consumer. The Vandy chip support multiple mode including temperature control mode, voltage regulation mode and bypass mode.

With 7ml juice bottle, the Vandy Vape Pulse V2 RDA has 2ml e-juice capacity is perfect match with the Pulse Dual Kit. It includes three different airflow rings to support dual or single coil builds. The Pulse V2 RDA adopts an innovative floating deck, which supports top squonk feeding and bottom juice return design. Easy to build and avoid leakge.

Parameters

Pulse Dual Squonk Mod:
Size: 75.3*52.9*41.7mm
Power range: 5-220W
Working voltage: 6.4-8.4V
Working current: <50A
Output voltage: 0.5-8V
Coil resistance range: 0.05-3ohm(TC 0.05-1.5ohm)

Pulse V2 RDA:
Length: 32mm
Diameter: 24mm
Capacity: 2ml

Next, Vandy Vape Pulse X Vape Kit comes with the colored translucent panels, co-designed by Tony B and StefeN Z.

Vandy Vape Pulse X Kit features colorful translucent panels with magnetic design, easy to replace. Pulse X BF Mod is powered by a single 18650/20700/21700 battery and supports 90W maximum output power. The Pulse X RDA feeds the juice directly to the top of your coils, giving you the experience you would get with typical dripping atomizers, and saturating your wicks and coils from the top. This ensures that your coils are always wet and ready to go.

When squonking the one-way-valve design allows excess juice to return to the bottle at the bottom. It also allows you to drip right onto the center through the vape mouthpiece for non-squonk usage, and the liquid rolls off the top center of the post and onto your coils. The “X” design for the post can be used effectively for vertical and horizontal builds, and can accommodate large or samll coils. So do you want to have try?

Parameters

Pulse X BF Mod:
Size: 82.6*54.8*27mm
Power range: 5-90W
Standby current: <30uA
Output voltage: 0.5-8.5V
Resistance range: 0.05-3ohm(VW)/0.05-1.5ohm(TC)
Temperature range: 200-600℉/100-315℃


Pulse X BF RDA:
Length: 25.5mm
Diameter: 24mm
Capacity: 2ml
Material: Stainless Steel

Three Vaporesso Vape Kits 220W For Your Option

Guys, do you like the Vaporesso brand? Today I will recommend you three kinds of Vaporesso vape kits, which of them can fire up to 220W. Maybe this time you will fall in love with Vaporesso because of its high performance and perfect design.

Vaporesso Polar 220W Vape Kit with Cascade Baby SE Tank is an elegant vaping device with prismatic appearance. The kit can fire up to 220W and the tank with 6.5ml, so the combination of them is perfect. Vaporesso Polar 220W TC Kit has an elegant prismatic appearance along with the 2 inch color screen which gives you a wonderful vision experience.

Besides, Polar adopts the advanced OMINI Board 4.0 integrates Insta-Fire, Super player Mode and multiple protections. 0.001s firing speed brings you the most rapid and safe heating and the purest rich flavor from the first puff to the last. 2.5A quick charge upgrades your vaping experience to a new stage.

The Cascade Baby SE Tank with 6.5ml e-juice capacity and features the unique isolation that structure to reduce potential dry hit and extends the coil life.  Cascade Baby SE tank adopts an easy top fill system with the safe lock mechanism for convenient juice filling and effectively avoiding leakage. Experience the great vaping with Polar.

Parameters
Size: 45mm*28mm*144mm
Tank Capacity: 6.5ml
Display: 2 inch color screen
Thread: 510 thread
Power Range: 5W to 220W
Resistance Range: 0.03-5Ω
Battery: Dual 18650(Not Included)

Vaporesso LUXE 220W Vape Kit is a Tailored Beast which comes with brilliant all-screen design and powerful wattage. The LUXE box mod is powered by dual high rate batteries and supports 220w power. The mod utilizes interchangeable magnetic battery door, which makes battery replacement easier. All-screen design makes the mod different from other mods with OLED screen. And it supports various modes and TC function.

The Kit also included Skrr sub ohm tank which comes with Quadflow air distribution system to provide exquisite flavor. It is creating a perfect balance between taste and cloud chasing. 8ml large capacity and QF coils provide more flavorful and denser cloud than ever. The tank also has an advanced design of locking mechanism in drip tip. It is not only ensures security but also avoid leaking.

Parameters
Tank Capacity: 8ml
Power Range: 5-220W
Battery Type: 2 * 18650 batteries(not include)
Thread: 510


Vaporesso Revenger X 220W Kit is power by dual 18650 batteries and max output wattage up to 220W. The mechanical buttons now give way to a highly responsive touch buttons, bringing out the more integrated look of the IML interface.

Built with OMNNI Board 2.2, in additional to all the advanced setting and output modes, it now has a more friendly UI. Equipped with NRG tank improved, you will be rest assured enjoying the flavor and vapor out of the variety of GT cores available.

Parameters
Mod Size: 45mm x 89mm x 28mm
Display: 0.96'' OLED
Brightness: 16 tier adjustment
Button: 1 physical fire button, 3 responsive touch button
Wattage Range: 5 – 220 Watts
Voltage Range: 0 – 8.5 V
Resistance Range: 0.05 – 5Ω
Temperature control range: 100°C-315°C/ 200°F-600°F
Output modes: VWW(H/N/S), CCW, CCT, VT(NI, TI, SS), TCR(M1, M2), RTC, BYPASS
Battery: Dual 18650
Capacity: 2ml/5ml
Diameter: 26.5 mm

Best Smok Stick Series Vape Kits Listing For You

Smok is one of the best manufacturers in the vape market, and there are many perfect ape devices welcomed by many vapers. Do you love the vape pen kits from Smok Vape company, especially the stick series? And Smok Stick series make a big success, leading in the market. And many persons love the design of the SMOK Stick Prince Kit, so how about you? Today I will list the smok stick series vape kits for you.

1. SMOK Stick Prince Kit

The Smok Stick Prince Vape kit is a simple yet powerful all-in-one package, offering the best of both worlds - wonderful simplicity and extreme vaping performance. Stick Prince employs the built-in 3000mAh battery which is powerful and durable, with its large capacity you can enjoy long time vaping.

what's more, it will bring you massive cloud of vapor. Hold Stick Prince in your hand you can feel how exquisite it is. The newly designed hexagon power button looks special and can give you better hand-feel when you press it. Stick Prince has LED indicator to tell you the accurate condition of itself. For example, the LED will flash 4 times each time you take a puff; Flash 15 times when the voltage is lower than 3.3V.

The standard TFV12 Prince tank supplied is either 2ml capacity – for the EU (due to TPD Regulations) or a massive 8ml outside of the EU! You can also purchase the bubble glass tank to increase the capacity of the EU version.

Parameters
Stick Prince Battery

• Size: 24.5mm(W) x 85mm(H)
• Voltage Range: 3.4-4.2V
• Power: 80W-100W
• Battery: 3000mAh

TFV12 PRINCE Tank

• Size: 63mm(H) x 28mm(D)
• Capacity: 8ml
• Material: Stainless steel
• Thread: 510

2. SMOK Stick X8 Kit

SMOK Stick X8 Vape Kit is one pen style starter kit from SMOK, which brings the user experiences to the top level of this kind. The kit owns a battery of 3000mAh super high capacity and 2000amps continuous discharge capability, the tank it included is the powerful TFV8 X-baby tank, which has a capacity of 4ml and a creative top airflow system. You can enjoy rich flavor and massive clouds with it. Besides, its swivel top cap design can bring you convenience when refills.

There are multiple protections, such as: 8 seconds protection, low resistance protection, short circuit protection, and low voltage protection. The delrin drip tip will bring increased airflow and provide you with powerful draw effects. Bring you an extremely open draw. Airflow can be adjusted freely by turning the airflow control ring at the top of the tank.

Parameters

• Battery: 3000mAh
• Battery Size: 24.5*85mm
• Voltage Range: 3.4V-4.2V
• Atomizer: 24.5*59mm

3. MOK Stick AIO

SMOK Stick AIO Vape Kit features internal battery of 1600mAh and 2ml built-in tank. With 1600mAh battery capacity and safety output, that can vape for a long time. The Stick AIO can be charged via the Micro-USB port easily and allows you enjoy vaping freely. Adopts leak-proof built-in glass tank, top rotary cap and improved juice wicking holes, the SMOK Stick AIO Kit will bring you a great vaping experience and nice flavor!

Parameters

• Capacity: 4ml
• Size: 22mm(D) x 115mm（H）
• Material: Stainless Steel
• Battery Capacity: 1600mAh
• Connector: 510

4. SMOK Stick M17 All-in-one Kit

Stick M17 is an all-in-one kit from Smok, it can bring you superior vaping experience by the combination of 1300mAh battery and Stick M17 core. Although it is slimmer than other pen-style kits, it has long run-time and multiple protections. With one button you can easily finish all the operations.

What's more, it has 2ml capacity, classic swivel top cap and leak-proof atomizer base, all of which can prove how excellent Stick M17 is. The M17 Kit has a fixed wattage setting, always firing at full power until the battery is depleted, which can then be charged via the supplied USB cable. The kit comes with two 0.6Ω Sub Ohm coils, so can be used with the higher VG mixes.

Parameters

• Size: 130.65mm x 17.5mm
• Battery Capacity: 1300mAh
• Tank Capacity: 2ml
• Resistance Range: 0.5ohm - 1ohm
• Material: Stainless steel
• Coil: Stick 0.6ohm dual coil
• Color: Black/Blue/Gold/7-Color/Stainless

Open Box Video Review on Hellvape Dead Rabbit RTA and Augvape Intake RTA

2018, it was the airflow year of the atomizer. It seems that each new product uses a different airflow design, trying to strike a perfect balance between smooth inspiration and amazing taste. Some designs do a good job, others are very bad. Today we will make a comparison evaluation about two RTA which have unique airflow - Hellvape Dead Rabbit RTA Tank and Augvape Intake RTA.

The first is Hellvape Dead Rabbit RTA. Hellvape Dead Rabbit RTA is a fully comprehensive 25mm rebuildable tank atomizer collaborated design by Vapin' Heathen and Hellvape with CNC engravings on the wall sleeve. Dead Rabbit RTA has a easy coil build deck offering a fantastic option for those after excellent performance from a rebuildable tank.

The Dead Rabbit features four post build deck with gold plated positive posts and a 5mm deep juice well, and is capable of running both single and dual coil options and each terminal has side mounted hex flathead screws, which are both included.

Airflow enters the Dead Rabbit RDA via top-side diagonal adjustable airflow which focuses on flavor and minimizes leaking. The airflow can be adjusted for both single and dual coil options and a knurled grip allows for adjustment of the airflow with ease. To offer a better vaping experience, there is an 810 wide bore drip tip and Dead Rabbit Logo on the glass tube.

The second is Augvape Intake RTA Atomizer. I appreciate that the tip drip is in low profile because the whole top portion of the RTA is a little on the tall side, and running a tall drip tip would have enhanced that aspect further. The top cap is a quarter twist bayonet style, and due to its height, you have plenty to grab onto making refilling an absolute doddle.

The Intake has a floating deck which appears to be press fit, and it has the same non-adjustable positive pin seen on the OBS series of tanks. One of my favorite touches is the wicking channels being angled upward at 45 degrees running in line with the bubble glass outward extension.

About the Augvape Intake RTA's performance. Due to the complex top airflow, the richness of the smoke is quite good under the premise of opening small air intake holes. The multiple fruit reduction is more realistic and layered. Even in the case of the full opening of the air intake, there is no significant decrease in the richness of the smoke, but the amount of smoke is greatly increased.

You may also like this RTA below:
Joyetech riftcore solo rta review

Unique Joyetech RunAbout Kit | Higher Performance Than NOVO Pod?

Guys, today I will bring you two unique pod devices, one is just launched, and the other one is on hot sale. OK, let's make a comparative evaluation about them.

The first one is the Joyetech RunAbout Pod System Kit. I got the Zebra version. As mentioned in the introduction, the inspiration behind the appearance of the device is a Yacht, but to me, which they look just like miniature surfboards. The shape isn't just different for normal vaping device, but in my opinion, it is aesthetically pleasing and works excellently ergonomically.

The bottom of the device narrows to a point, and this point both front and back have a translucent section for LED lighting to shine through. Moreover, the pod cartridge has a comfortable mouthpiece with quite a narrow borehole for the vape, which can hold 2ml of e-juice. The coil fitted inside the pod is 1.2ohm and looking inside the pod you can clearly see it has quite generous wicking slots for a pod system coil, so you receive 2 pods with the RunAbout.

About the RunAbout's performance. The draw on the device is perfect for me, but if you are looking for a tight MTL draw, then the RunAbout isn't for you. The draw is a choice between a loose MTL or even a very tight restricted lung hit. When using the 70VG liquid, it kept up no problem at all despite chain vaping at times, and the flavor is very good, comparable to the Aspire Nautilus AIO pod system.

The second is SMOK NOVO Pod Vape Kit. The overall shape of the battery body is round, and the SMOK LOGO and an LED indicator light are visible on the front side. Both sides are made of bright silver mesh decorative patch design, which has a very good anti-fingerprint effect. The main body and the upper and lower edges of the pod are made of high-gloss stainless steel.

The inside of the battery body is gold-plated and the bottom is made of the rubber pad. From the thickness of the pod edge, the workmanship is relatively solid, and there is no need to worry about the deformation of the extrusion. The cartridge supports 2ml of e-juice capacity. It is enough for daily use of high-concentration MTL to meet the needs of a whole day.

About the NOVO's performance. Its suction resistance is more compact, you can feel the obvious resistance of suction, e-juice's reduction is sufficient, never found incomplete atomization and poor oil guiding. The degree of smoke and atomization is also good, and the smoke will be slightly larger than the conventional smoke. The comprehensive taste of NOVO Pod compared with INFINIX is obviously stronger than the former. The built-in 450mAh is used for MTL vape for a whole day.

You may also like this blog below:
Does The WISMEC Luxotic DF Kit Really Faster Than Ever?

GeekVape Aegis Mini Kit Is Better Than Geekvape Aegis Legend Kit?

Guys, have you had any impression on the Aegis Kits? There is not only one Geekvape Aegis Legend Kit in the vaping marketing, but also Geekvape released their newest Aegis series - GeekVape Aegis Mini Kit, so which one is your choice between GeekVape Aegis Mini Kit and  Geekvape Aegis Legend Kit?

As we all know, Geekvape Aegis Legend Kit is an amazing vape kit because this kit features waterproof, shockproof and dustproof. Powered by dual 18650 batteries, the Aegis Legend mod fires a maximum output of 200W. And Aegis Legend is very durable and reliable for the intentions of avoiding damage by accident with the military standard 810G-516.6 shockproof system, IP67 waterproof and dustproof system. What's more, the Aegis Legend works with an upgraded AS Chipset, bringing stable performance and powerful output.

The GeekVape Aero Tank included in the kit is an elegant sub-ohm atomizer with 4ml capacity and 25mm diameter. This tank is with an easy top refilling design, so you can screw off the top cap easily. Plus an adjustable bottom airflow slot to bring a smooth airflow to the coil without compromising its flavor.

The Aero Sub-Ohm Tank utilizes the IM Coil Family which consists of the IM1, a 0.4 ohm KA1 vertical coil rated at 40 to 60W and the IM4, a 0.15 ohm Ni80 vertical coil rated at 60 to 80W, a 0.2 ohm KA1 Mesh X1 coil, rated at 30 to 90W but best at 60 to 80W. 

Parameters

Aegis Legend Mod
Size: 30.6* 58.5* 90.5mm
Maximum power output: 200W
Battery: 2 * 18650(Battery not included)

Aero Mesh Sub Ohm Tank
Size: 25 x 45mm (w/o thread)
Capacity: 5.5ml
Filling: Top filling
Coil Type: Mesh Coil 0.2ohm (30-90W); IM4 0.15ohm (60-80W)
Thread: 510 thread


The Geekvape Aegis Mini TC Kit is the mini version. It also consists of the Geekvape Aegis Mini MOD and the Cerberus Subohm Tank. Geekvape Aegis Mini also adopts the unique IP67 waterproof, dustproof and shockproof design, so you cannot worry about water or dropping by accident. Equipped with built-in 2200mAh battery and the advanced AS chipset, the Geekvape Aegis Mini can fire up to 80W max output with 9ms quick firing speed and various working modes. Plus the first grade multiple safety protections, it will be very safe to operate the Aegis Mini.

And Geekvape Cerberus Subohm Tank comes with optional 2ml/5.5ml e-juice capacity for your selection. And the super mesh X2 coil maximizes heating contact surface area, which can provide more vaping flavor and clouds. So it’s the time to enjoy your vaping time.

Parameters
Size: 120.5mm * 27mm
Capacity: 5.5ml
Maximum Power Output: 80w
Battery: 2200mah Built-In Battery
Display: With Display Screen
Filling: Top Filling
Coil Type: Super Mesh X2 Coil 0.3ohm
Thread: 510 Thread

Now the two Geekvape Aegis Kit are sold on Vapesourcing at the low price, and which one you want to order depends on you, but they are the good vape device for you to own one. If you are a careless man, this vape kit are your choice because of waterproof, shockproof and dustproof.

You may also be interested in this blog below:
Eleaf iJust ECM VS iJust 3, Does it Will Be Better Than iJust 3?

Does The WISMEC Luxotic DF Kit Really Faster Than Ever?

Wismec has released the WISMEC Luxotic DF Kit. The new kit powered by two 18650 batteries. On September 30, Wismec presented the Luxotic DF Box Kit on their Facebook. WISMEC Luxotic DF Kit use a squat pentahedral case with slightly rounded corners, available in four colors.

The maximum power of the Luxotic DF box mod can reach 200 watts. You will need a pair of 18650 batteries for the power, you can charge them by no more than 2A. The volume of the tank for the e-liquid is 7ml.

The front side was machined "under the grip", equipped with an angular fire button, a display board, and an adjustment key with a USB port. On the opposite side fixed removable panel with a window hiding the bottle. Hinged battery cover installed on the bottom. You can see there are four colors choices on our vape shop and also it's pre-ordering now!

Luxotic DF Kit also contains a Guillotine V2 which has multifunctions. Simply by installing the atomizer tube upwards or downwards, you can realize two different ways of regulating airflow and get unprecedented vaping enjoyment. Apart from the equipped short drip tip, the optional PEI mouthpiece offers you a new vaping experience.

wismec vape Luxotic DF Kit Paraments:

• The size of the mod: 77.2*54.2*42.1mm
• Fashion weight: 190 g
• Batteries: 2x18650
• Maximum power: 200 watts
• Tank capacity: 7 ml
• Guillotine V2 Tank size: 34.3*24mm

Besides, wismec said the Luxotic DF can offer you a faster firing speed you have not seen. Should we have a try? Think it will enriching our vaping life!

>>You May Also Want To Buy:

https://vapesourcing.com/wismec-sinuous-solo-kit.html

>>More Information:

Do You Want to Put The Uwell Hypercar Kit Into Your Shopping Basket?

Asmodus EOS II mod Coming With A Lof Of Friendly Features For Your Vaping

A beauty mod from asMODus is Asmodus EOS II box mod. It's a another design collaboration between asMODus and the company Ultroner who were found in 2016 and mainly design stab wood devices. Also, the bigger feature is that the asMODus say this mod can accommodate tanks of up to 26mm in diameter without overhang. What a pretty mod and seems to have a lot of user-friendly features too. Let's going to see:

Asmodus EOS II Mod Coming With:

• asMODus Ultroner EOS II mod
• Velvet carry bag
• Wood buffering tool
• User manual

best vape shop is offering 3 colors for you, that is Green, Blue, and Purple. But obviously, with stab wood, the shades and patterns will vary.

The EOS II has a colour touch screen which is a capacitive type and you can swipe left or right to change modes. Also, you can upgrade the firmware and add different screen displays. Maximum output is 180W from 2×18650 batteries (not included). There are 3 firing modes – Soft, Normal and Hard to customise how rapidly and intensively the power is supplied to the 510 connector. The chipset is the GX-180-UTC which is similar to that used in the EOS 180W and the Minikin V2.

asMODus Ultroner EOS II vape box mod Specs:

• Battery: 2×18650 (not included)
• IPS colour Capacitive touchscreen
• Full stab wood body with Aluminium frame
• Firmware upgradeable
• Chipset: GX-180UTC
• Modes: Soft, Normal and Hard
• Output: 180W max
• Accommodates tanks up to 26mm
• Resistance range: 0.1-3ohm

>>You May Also Want To Buy:

https://vapesourcing.com/joyetech-ultex-t80-kit.html

>>More Informations:

Eleaf iWũ Pod System Kit Review -The Hollow-Out Cover Is Impressive

Do You Want to Put The Uwell Hypercar Kit Into Your Shopping Basket?

Today let me show you a new vape starter kits from Uwell. It's the Uwell Hypercar Kit, which comes with the Hypercar mod and the Whirl tank.

Let's Look At The Uwell Whirl Tank First:

The Cheap Uwell Hypercar Kit consists of Whirl tank which is apparently able to switch between vaping styles – either MTL with the 1.8ohm coil or DTL with the 0.6ohm coil, and has a capacity of 3.5ml. Also, the airflow has settings for both styles. The Nunchaku tank has excellent flavor at surprisingly low wattage so I can actually believe this!

Uwell Whirl Kit Tank Specs

• Size: 24.2×46.3
• Capacity: 3.5ml
• Coil resistance: Dual coil NiChrome 0.6 ohm / Single coil NiChrome 1.8ohm
• Adjustable airflow for MTL or DTL
• Plug-Pull coil replacement
• Top fill

Then Look At The Uwell Hypercar Mod:

The Uwell Hypercar mod requires 1×18650 battery which is not included. Power wise the maximum output is 80W and you have Variable Wattage, Temperature Control and Bypass user modes to choose from. Another good feature is mechanical on/off switch – this has been popular on other regulated mods in the past and saves the 5 click stuff and also accident firing.

Uwell Hypercar Mod Specs

• Size: 85.7×44.2×25.7mm
• Battery: 18650 (not included)
• Off / On mechanical switch
• Material: Zinc Alloy
• Output: 5-80W
• Resistance range: 0.1-3ohm
• Temperature range: 200-600°F / 100-315°C
• Modes: VW / TC (Ni) / TC (SS) / Bypass

You can choose 5 colors of the Uwell Hypercar Kit at vape online site – Red, Gold, Sapphire Blue, Silver, and Black. Does the Uwell Hypercar Kit will be put into your shopping basket?

>>Buy Related Vape Products:

https://vapesourcing.com/ijoy-ivpc-kit.html

>>You May Want To Know:

Smoant Campbel Kit - Drinking Or Vaping? Creative Or Puzzled?

Eleaf iWũ Pod System Kit Review -The Hollow-Out Cover Is Impressive

Two weeks ago I got a package from my old friend online vape shop vapesourcing, and they sent me the latest pod system of Eleaf. So today I will share this Eleaf iWũ Kit to you guys.

 It is a unique device that has a ton of style and function, and the device overall looks impressive out of the box. Each one comes with a metal cover assembly coated in some flashy, glossy colors. The inner plastic assembly, which contains the battery and pod, slide into this metal cover and has a sliding system to protect the mouthpiece when not in use. I love how they did this, and to add to the fun, the hollow-out cover can be purchased in different colors, so you can mix and match color combinations. The cover not only adds a unique look, but it gives the device a solid feel in hand rather than a fully plastic mod.

It has no buttons, no switches. So its vaping is simple. A bonus is a LED on the bottom part of the device. This illuminates when vaping and uses a color code to represent the battery level. I love that it shows battery life in this fashion as it helps alleviate some battery anxiety and always lets you know where the battery level is. As an FYI, I used this as my primary device at work for two days. I got almost all the way through 2 days on one battery charge. At this point, the pod was low, but not fully empty.

About the eleaf iWũ pod vape Kit's performance. MTL, DL, two types of suction resistance, with a pneumatic switch, very sensitive. The amount of smoke sucked out by the mouth in 1-2 seconds is equivalent to that of traditional smoke. Atomization and reduction are fairly clear, and the smoke exhaled by the mouth is too small and light. The condensation of the drip is well controlled. After smoking a tank of e-juice, the condensation water droplets on the inner wall of the chamber and the bottom inlet pores are slightly condensed.

In my opinion, I was really impressed with this iWũ Pod System Kit. I love the appearance, the changeable hollow-out cover.  It has good flavor, battery life got me through 1.5 work days, and I just love the overall feel of it.

Buy it here: https://vapesourcing.com/eleaf-iwu-kit.html

>>More Vape Products:
nkd 100 salt lava flow e-juice

>>More Information:

Eleaf iJust ECM VS iJust 3, Does it Will Be Better Than iJust 3?

Smoant Campbel Kit - Drinking Or Vaping? Creative Or Puzzled?

Today a crazy new design kit made me very puzzled, this is the Smoant Campbel. But why I said it is odd? Let me going to tell you!

It's said that the campbel combines soft drinks and vaping in one device!

I don't know that's why? Well, I'm still trying to give a review for you!

Smoant Campbel Kit can bring you a mod component which houses a single 18650 battery and has a maximum output of 80W. The mod has a direct output which is not adjustable so you get the full power of the battery and the power output will drop as the battery charge decreases.

Drinking when vaping? I think it's a little strange. On top of the mod, you have two more components a Filter and a Tank. I assume it's almost normal that is the e-liquid vaping part of a 2ml vape juice capacity and a Ni80 coil.

And you can add 3ml soft drinks to there which screw the Filter component on top of the tank.
Seems that you can mix your e-liquid with a favorite soft drink to vape, do you want a try?
There are 3 colors to choose from at our best online vape shop – Champagne Gold, Sapphire Blue and Classic Black.

Smoant Campbel Filter Specs

• Size: 23.5x111mm
• Capacity: 3ml
• Smoant Campbel Tank Specs
• Size: 19×30.4mm
• Capacity: 2ml
• Coil: Ni80 0.2ohm (30-60W)

Smoant Campbel Mod Specs

• Size: 77x55x30mm
• Output:1-80W
• Resistance range: 0.08-3ohm
• Battery: Single 18650 (not included)
• Mode: full battery output
• Vape mixed flavours of e-liquid and soft drinks

Well, think it will be a huge hit with such a massive innovation although it is a little crazy for his design, that's a creative idea we have never seen!

>>Related Vape Products:

tesla falcons kit
cheap naked 100 cuban blend e juice

>>You May Want To Know:
What's The Best Squonk Mods You Need Get?

Eleaf iJust ECM VS iJust 3, Does it Will Be Better Than iJust 3?

eleaf has a new vape pen style kit-eleaf ijust ecm. It's has a beautiful style and similar to the ijust 3, but it contains an iJust ECM tank instead of an Ello Duro tank, this tank appears to be very similar to the lovely melo 4 tank.

Let's see what's the features eleaf ijust ecm has? Will it be better than iJust 3?

Both have two coil heads

• EC-N means a net style design and EC-M means the other style is more of a sheet with multiple holes. Also, the iJust ECM tank uses the EC range of coil heads and there are the two mesh coil heads. Ello Duro tank has two coil heads too. There are the HW-N and HW-M coil heads.

The same capacity of the battery

• iJust ECM has a capacity of 3000mAh which is pretty good for this style of mod. Also, our eleaf ijust 3 features a 3000mAh built-in battery and is easy to hold in hand. There are the same in the mod.

Output 40W maximum VS 80W maximum

• iJust ECM's mod will output 40W maximum but iJust 3 can fire up to 80W.

5 colors VS 6 colors

• iJust ECM have are 5 colors to choose from – Dazzling, Gold, Silver, Blue, and Black. But iJust 3 has one more than it, maybe it's an old version I think that.

Eleaf iJust ECM Specs

• Size: 25×137
• Battery: 3000mAh internal
• Output wattage: 40W max
• Resistance range: 0.1-3ohm
• E-liquid capacity: 2ml (EU) / 4ml (standard)
• Uses new EC-N/EC-M net and mesh coils
• Retractable top fill
• LED battery indicator
• Adjustable airflow

Eleaf iJust 3 Specs

• Diameter: 25mm
• Height: 136mm
• E-liquid capacity: 6.5ml
• Battery capacity: 3000mAh
• Output wattage: 80W max
• Resistance range: 0.1Ω-3.0Ω

I think Eleaf is a good e-cig company and our new Eleaf iJust ECM has the different pattern on the body, also many people still love ijust 3, so both two eleaf kits are recommended, hope you can have more fun and get much news about vape just go to online cheap vape shop

>>Related Vape Products:
obs cube kit
buy joyetech ego aio mansion kit

>>You May Want To Know:
Do You Like A Snake Skin Vape Kit? Sigelei Sibra F Kit Is Here

What's The Best Squonk Mods You Need Get?

What is a squonk mod looks like?

A squonk mod is a vape mods with a built-in squeeze bottle used to feed e-liquid to an atomizer. Squonk mods have actually been around for quite some time but have only recently hit the mainstream. Squonk mods stayed in the high-end enthusiast territory for some time and the squonking is in fact nothing new.

What's the types of squonk mods?

Regulated and Unregulated is the most common types, although there are many ways to categorize squonk mods. Unregulated squonkers are providing the atomizer with the raw power of the battery depending on the resistance of the build. And the regulated squonk mods come with fully-featured VW/VV chipsets that let the user pick the wattage or voltage they wish to go with.

NO1. Vandy Vape Pulse BF 80W Squonk Box Mod

The pulse bf 80w new color is a collaboration with reviewer Tony B. It is lightweight, ergonomic and rated for up to 80 watts using a single 18650 or 20700 battery. The device features a leakproof 8 mL squonk bottle and many panel options to choose from.

NO2. Basium BF Squonk Box Mod 180W by Vaping Biker&Dovpo

The Basium BF Squonk Box Mod is a collaboration with The Vaping Biker. Focusing on utility, the Basium is a no-nonsense mod that can only be run in two modes: variable wattage and voltage. It takes dual 18650s and features a 0.96“ OLED screen with dual-battery monitoring capabilities and a 6 mL silicone squonk bottle.

NO3. Eleaf Pico Squeeze 2 100W

The Eleaf Pico Squeeze 2 is the evolution of the once super popular Pico Squeeze. A compact and rugged squonking setup, the Squeeze 2 now features the TC-capable Avatar Control chipset, a bright 0.49“ OLED display and an 8 mL squonk bottle. It is compatible with 18650 and 21700 batteries.

NO4. Aspire Feedlink Revvo Squonk Kit With Revvo Boost Tank

Aspire continues to lead the way with the Aspire Feedlink Revvo Kit. Operated in bypass mode, the Feedlink comes with a variety of safety features, a top-mounted firing button and LED battery life indication. Its 7 mL squonk bottle allows you to have up to a 9 mL max capacity when using the Revvo Boost tank.

Both the 4 best squonk mods you can buy them at the vapesourcing best vape store.


>>You may also like:

innokin proton plex kit

geekvape aegis legend 200w

>>Previous article:
My No.1 Vape Pod Kit -Smok NOVO Vape Kit

Do You Like A Snake Skin Vape Kit? Sigelei Sibra F Kit Is Here

A new vape pen style kit is out, that is Sigelei Sibra F Kit which has a snake skin themed design. Sigelei want catching people's eye, so they designed the fake snakeskin vape kits! And saw it can be pre-ordered on my cheap vape store.

I think the features of this kit seem to be great and creative! I haven't seen a vape producer company made that kit like that, the sigelei is a very powerful company, their products will attract someone who love snakes, but there also some part of people don't like it!  

Anyway looks are always down to my personal preference so let's investigate what else the kit has to offer. The mod component of the vape pen kits contains a built in 3000mah battery which is pretty good capacity for this style of mod.

Sigelei Sibra F Kit Includes

1. Sigelei Sibra F Mod
2. Sigelei Sobra Mini Tank
3. MS coil
4. Spare glass
5. O-rings and spare parts
6. USB Cable
7. User manual

>>Related products:

vaporesso drizzle fit kit

ijoy avenger 270 234w

>>Related article:

How The Nautilus AIO Kit Will Make The Success?

My No.1 Vape Pod Kit -Smok NOVO Vape Kit

I don't understand why the smok novo vape kit is so popular, but since my friend gives me one I became realized it. I'm amazing his beautiful size and looks so fashionable.

I'm a minimalist so don't like the complicated pod kit, many kits I can't really want have a try, but novo kit has changed my mind, it comes with a 450mAh battery and a 2ml e-liquid capacity.

The novo kit can be charged by a micro-USD port, that's so easy, you can recharge your novo on your laptop, usually I did it like that!

Thanks the great SMOK BRAND company bring us the such best vape pod kit, really appreciate that! I know their products always take a large amount number on the market and almost famous the whole vape online world, hope their can keeping on that and bring me much more interesting vape kits!

So think the smok novo vape kit is becoming my NO.1 vape pod kit, and it's a best choice for minimalist, they will like his design!

Also I want to tell you a vape juice which I used it recently, it's the naked 100 very cool e-juice. I like it just like it's name "Very Cool",  think the freshly picked Blueberries, Blackberries, and Raspberries mixed tastes will bring you a cool summer!

>>Related Vape Products:

falcon tank

buy naked 100 cuban blend e juice

>>Related Articles:

NAKED 100 E-Liquids Bring Me Into SUMMER Holidays

How The Nautilus AIO Kit Will Make The Success?

I bring a lovely little new vape kit today, it's the Aspire Nautilus AIO kit. To be honest, It's a kind of coming together with AIO and Pod Mod hybrid.

I remember that the Nautilus tanks such as the Aspire Nautilus 2 have been at the top of the best MTL tank for many days. Nautilus AIO Kit will make the same sense and new vapers will love it I think.

Let's See How The Nautilus AIO Kit Will Make The Success?? 

A pod version using the same BVC coils as the tank plus a new coil for best nicotine salt e liquid. The mod body needs a 1000mAh battery, and this look similar to the Aspire breeze 2.

Usually, I'd better like replace the coil not throw away the whole pod, so the Nautilus AIO Kit has a removable coil that really suits me!

I see Nautilus AIO can hold up 4.5ml vape juice, but for the safe and the EU regulations it's only 2ml now, but it's enough for a pod system kit.

I will prefer to choose a purple one, although there are six colors to choose from. Will you want to buy the Aspire Nautilus AIO Kit too? You can go to our vape shop to have a look!

>>You may also interest:

Aspire breeze 2 Kit

buy freemax mesh pro replacement coils

>>Previous article:

Come And See What's Advantages Of Vaporesso Luxe Kit 220W!

NAKED 100 E-Liquids Bring Me Into SUMMER Holidays

Today let me show you the e-liquids I recently bought, they come from naked 100. I like eating fruits every day, so I prefer fruits flavor than other flavors like ice cream or popcorn. So I buy naked 100 polar breeze e-juice with no hesitate.

Polar breeze smells very like a perfect cantaloupe refreshment, it's mixed pineapple and cantaloupe, sweet and tart, when I vape it, just like eating a cantaloupe, this flavor can't write in a word!

Another naked 100 fruit e-juice which I tasted is naked 100 berry belts e-juice. We can see it's a strawberry juicy flavor from its name. The truth is yes, and it will bring me to remember the best flavor of those long strips of berry-flavored chewy candy. I think I will love it for a long time!

And also I want to introduce the Naked 100 Lava Flow E-juice, I can't believe such a good taste of it, it's mixed many fruits taste, can you imagine juicy pineapples, fresh coconuts and ripe red strawberries mixed together? 

Hope the naked 100 can bring us many more new flavors, I'm waiting to see! Their vape juice pretty good which can bring me into the summer holidays!  By the way,  we can buy them at vape online store, it's so easy for us!

>>You may also interest:

cheap nkd 100 salt hawaiian pog

>>Previous Article:

Digiflavor DROP SOLO RDA In Stock & Only Need $29.95

Come And See What's Advantages Of Vaporesso Luxe Kit 220W!

Cheap Vaporesso Luxe Kit 220W comes at present in a kit with the Vaporesso Skrr tank which I have already previewed. So I will concentrate on what's advantages this new mod from Vaporesso has to offer.

Edge-To-Edge: The Luxe mod is described as having an "edge-to-edge" display. The 2in TFT color screen merges into the front of the mod.

Haptic Feedback: On the front of the mod the adjustment buttons are hidden and are touch sensitive but will give a vibration in response to the input. Like the "haptic feedback" on your Smartphone.

Super Player Mode: This uses the Omni Board 4.0 chip which boasts a quick 0.001s firing speed and the "Super Player Mode". Super player mode refers to the fact that a wide range of coil resistances can be accommodated making this suitable for MTL tanks as well as Sub Ohm coils.

Power Function: You will need 2*18650 batteries for the Luxe which are not included and it will output up to 220W. Apparently there is a 2A quick charge and Pass-through (vaping whilst charging) ability – however as this mod has removable batteries it is always recommended to use an external charger for battery safety. If you still want know more, you can go to our vape online store have a look!

Buy Vaporesso Luxe Kit You Will Get:

• Vaporesso Luxe Mod
• Vaporesso Skrr Sub Ohm Tank
• QF Strip coil
• QF Meshed coil
• Replacement glass
• O-rings
• USB Cable
• User manual

Vaporesso Luxe Mod Specs:

• Size: 86x30x47.8mm (146x30x47.8mm full kit with tank)
• Battery: 2×18650
• Output: 5-220W
• Resistance range: 0.03-5ohm super player
• Display: 2in TFT Colour
• Omni Board 4.0 chip
• Hidden touch sensitive vibrating buttons
• 0.001s instant fire
• 2.5A quick charging

>>You may also interest:

cheap aspire breeze 2

cheap eleaf istick pico s

>>Previous Article:

Buy Vapefly Galaxies MTL RDTA Or 5GVape Leopard RDTA?

Digiflavor DROP SOLO RDA In Stock & Only Need $29.95

Digiflavor DROP SOLO RDA Introduction

Now the Digiflavor DROP SOLO RDA only need $29.95 and it's in stock on our online shop vapesourcing.com. Which is a brilliantly designed rebuildable dripping atomizer that not only features a compact design but has also been specially engineered for those that prefer single coil configurations. While other RDA's may focus greatly on generating the best vapor production, the Drop Solo has been designed to deliver the best flavor production.

Digiflavor DROP SOLO RDA Parameters

•  Diameter: 22/24mm
•  Height: 30mm
•  Material: Stainless Steel

Digiflavor DROP SOLO RDA Contents

• 1*DROP SOLO RDA
•  1*Bottom Feed Positive Pin
•  1*PMMA 24mm Accessories
•  1*PMMA Mid Cap
•  1*PMMA Top Cap
•  1*Allen Key
•  1*Drip Tip
•  1*510 Drip Tip Adapter
•  2*Coil(0.35ohm)
•  1*User Manual
•  Spare Parts Pack

Similar to the popular Drop rebuildable dripping atomizer, the Drop Solo offers a striking resemblance, except for the fact that it only contains two posts, both positive and negative. It still features the same slightly crafted slant to make coil installations a breeze, and its posts boast rather large post holes, making the installations even easier. The airflow design is absolutely superb, features a stepped airflow that allows you to dial in the airflow with precision, eliminating any whistling and causing for an overly satisfying vape experience where airflow is plentiful if you choose it. In a word, because of adopting its magnificent appearance from the original Drop RDA, the Drop Solo too looks extraordinary.

You may also interest:

vandy vape capstone rda in stock

shenray b2k rsa v5 style rda in stock

More informations:

Vapesoon Vs12 Brings Large Inlets For Huge Vapor And Flavor

Buy Vapefly Galaxies MTL RDTA Or 5GVape Leopard RDTA?

Vapefly Galaxies MTL RDTA

The Vapefly Galaxies MTL RTA and the Vapefly Wormhole have already received huge praise from reviewers so Vapefly have made a MTL squonker! So MTL is a more restricted vaping style – suited to those who want to replicate the sensation of inhaling on a cigarette. MTL tanks usually use higher resistance coils and lower power – making them more efficient for High Nicotine or best nicotine salt e liquid. We tell you all about MTL and DTL styles in our guide. The deck is for a single coil and there are 2 side airflow outlets which feed into the coil posts to supply the airflow directly to the coils.

Vapefly Galaxies MTL RDTA Specs

• Size: 22×39.8 (with PMMA drip tip) / 22×48.5 (with Delrin drip tip)
• Material: Stainless Steel
• Single coil build deck
• Capacity: 2ml
• Squonk compatible
• Standard 510 pin installed
• Adjustable airflow cap
• Deck mounted airflow adjustment screws
• Top or bottom filling

5GVape Leopard RDTA

5GVape Leopard RDTA is a 24mm rebuildable dripping tank atomizer with a very unique air intake system. Constructed by 304 stainless steel, it also has a 4ml e-juice capacity. Here I wanna give a special emphasis about its unique air intake system: The A Intake is from top slanting, whose air blows the top of the hot wire, and the B intake is vertical intake at the bottom, whose air blows to the bottom of the hot wire.

5GVape Leopard RDTA Specs

• Size: 24mm * 47.5mm
• Diameter: 24mm
• Material: Stainless Steel+Glass
• Capacity: 4.0ml
• Thread Type: 510
• Dual coil build deck
• Top and bottom airflow system
• Easy to refill design
• Gold plated contact pin
• Stainless steel construction
• 510 threading connection

Will you be putting the Vapefly Galaxies MTL Squonk RDTA or 5GVape Leopard RDTA on top of your Squonker?

You may also interest:
vandy vape pyro v2 rdta in stock
voopoo pericles rda in stock

More information:
Peculiar Design For The World Cup Fumytech Ballon Rda and Vendetta RDA