The Freemax Twister 80W Starter Kit is a stick device, consisting of the Twister 80W variable wattage built-in battery tube mod and the Fireluke 2 mesh coil sub ohm tank. Freemax Twister 80W Starter kit is powered by 2300mah built-in battery with twist-style variable wattage function, so a simple twist of the base then you can easily switch the output wattage from 5W to 80W, the easiest way of its kind.
The Freemax Twister chip has a host of protective measures like short-circuit protection and low-power protection, meanwhile, the LED light embedded inside the firing button indicates the various working conditions. The water transfer printing graffiti setup appearance makes it look highly recognizable from other stick pen-style starter kit.
The Fireluke 2 is the updated version of the original Fireluke M, with the X2 Mesh Coil and X3 Mesh Coil, slide to open top fill design, 360 degree eliquid feeding, 90% flax cotton & 10% cotton formula, so the Fireluke 2 offers a stylistic design and great flavor compared to all the other mesh coils and sub ohm tanks in the market.
Overall, the Freemax Twister 80W Starter Kit is a sleek, portable, and simple package for beginners who want a quick start into vaping.
Parameters
Freemax Twister Battery
Size: 24.7mmx 101.6mm
Battery: 2300mAh
Wattage Range: 5W-80W
Voltage Range: 0.5-9V
Resistance Range: 0.1ohm-3.0ohm
Power Efficiency: 95%
Thread: 510
Fireluke 2 Tank
Size: 24mm x 47.8mm
Capacity: 5ml
Material: Stainless steel/ Glass tube
Drip tip: 810 drip tip
The Joyetech ULTEX T80 Vape Kit features a mechanical tube inspired design that allows for a maximum output wattage of 80 watts and supports multiple temperature control modes. The ULTEX T80 features a stealth mode along with a preheat function for immediate satisfaction. The ULTEX T80 is powered by one high amp 18650 battery that may be charged via the micro USB charging port. A battery LED light inside the fire mechanism will flash to notify you how much voltage is left in the battery and whether or not it is time for a recharge.
In fact, the T80 can operate as a mechanical mod by putting the device into bypass mode. And, there also is a power mode, a temperature control mode with nickel, titanium & stainless steel and a TCR mode which stands for Temperature Coefficient of Resistance. TCR allows for entering the custom resistance settings for your particular coil. In temperature and TCR modes, the device can achieve 600 degrees Fahrenheit with any atomizer in the range of 0.05 to 1.5ohm.
Also included in the ULTEX T80 Kit is the Cubis Max tank. It is unique in that it works with a coil-less design that utilizes an NCFilm Heater that is much easier to clean that can be easily cleaned, has a long lifespan and makes cotton replacement an absolutely effortless process. The heating element of the NCFilm heater is constructed of Kanthal and is horizontally oriented for easy horizontal building to achieve big vapor with exquisite flavor.
The juice reservoir is not a bulb style glass, yet it can still hold up to 5ml of e-liquid. Designed with a refill system, the top cap easily slides open to expose a large fill port that you can squirt juice into. At the bottom of the top cap is also where two air inlets are located. These can be widely adjusted and, because of their location, prevent leakage.
Parameters
Size: Φ28.0*138.5mm
Battery using: single high rate 18650 cell (CDR ≥ 25A)
E-liquid capacity: 5.0ml
Heater: Joyetech NCFilmTM heater (Kanthal)
Screen: 0.49 inch OLED display
Output: 1-80W
Modes: POWER/BYPASS/TEMP(NI/TI/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode, 0.05-3.5ohm for POWER mode
Now Freemax Twister Kit and Joyetech ULTEX T80 Kit are sold on Vapesourcing for you to order one. I think they will be the best choice also in 2019.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.