Have you paid any attention to Eleaf iStick Nowos Kit? I think Eleaf iStick Nowos Vape Mod Kit is one of the best vape mod kits designed for you which consists of the iStick Nowos mod and the ELLO Duro atomizer.
The iStick Nowos looks to be revolutionary due to its innovative LED display. It shows vape data in large white font on a black background. Vape data on the screen includes indicators for current wattage, current resistance, battery charge level and much more.
You will get a maximum output of 80W from the mod and there is an internal 4400mAh battery – which when you compare to a 18650 battery usually around 2500-3000mAh is pretty decent.
The charging system's micro USB port is located on the side and it is a Type C USB interface that supports QC3.0/PD3.0 charging protocols. As a result, the iStick Nowos Box Mod only takes one hour and 20 minutes to charge, whereas the same charging process would take two and a half hours with a QC 2.0 cable. The mod allows for three modes of charging: DC5V/2A, DC9V/2A and DC12V/1.5A.
To ensure vaping on the Eleaf iStick Nowos is always safe, the unit is made with a wide range of safety features. These include temperature protection during charging, short circuit protection, 10 second over puff protection, over-current protection, over-discharge protection and overcharge protection.
As for the Ello Duro Tank, it uses the latest mesh coil heads for maximum vapor output with tons of flavor.The vape tanks measures 28mm x 54mm, has a weight of 57 grams and can hold 6.5ml of vape juice in its reservoir. The top cap slides open to reveal a juice port making refills a breeze.
Airflow is located on the bottom utilizes dual air slots that produce massive vapor and excellent taste, especially while working in combination with the mesh coils that power the tank. Available coils include the HW-M 0.15ohm head and the HW-N 0.2ohm Head that utilize kanthal heating elements.
Parameters
iStick Nowos Mod
Size: 43mm x 28mm x 83mm
Power Range: 5-80W
Battery: Built-in 4400mAh Battery
Battery Type: 18650
Resistance Range 0.1-3.0ohm
Output voltage: 9V max
Charging: 3A QC
Thread: 510 thread
ELLO Duro Tank
Size 28mm *54mm
Capacity: 6.5ml
Coil Type: HW-M Dual 0.2ohm Head(Pre-installed); HW-N Dual 0.2ohm Head
Thread: 510 thread
So how do you like the nowos vape? Today I will recommend you the Chubby Bubble Vapes Bubble Purp E-Juice for you to vape with the Eleaf iStick Nowos. I believe you must love this flavor.
Bubble Purp by Chubby Bubble Vapes has been one of the most sought-after sweets flavored ejuice in the entire vaping industry. Sweet and chewy bubblegum flavored with imported concord grapes from Italy offers the perfect cloud of bubble bursting enjoyment!
Parameters
Size: 60ml
Nicotine Avail: 0mg, 3mg, 6mg,12mg
To get the Chubby Bubble Vapes Bubble Purp E-Juice, it just cost you $12.90. Wow! It's so cheap.
Tuesday, December 25, 2018
Tuesday, December 18, 2018
Freemax Twister Kit & Joyetech ULTEX T80 Kit | Same Wattage For Option
Guys, today let me show you two best vape pen kits in 2018 - Freemax Twister Kit and Joyetech ULTEX T80 Kit, both of which can fire up to 80W. Now let's make a comparison between the two vape pen kits, so which one do you like better?
The Freemax Twister 80W Starter Kit is a stick device, consisting of the Twister 80W variable wattage built-in battery tube mod and the Fireluke 2 mesh coil sub ohm tank. Freemax Twister 80W Starter kit is powered by 2300mah built-in battery with twist-style variable wattage function, so a simple twist of the base then you can easily switch the output wattage from 5W to 80W, the easiest way of its kind.
The Freemax Twister chip has a host of protective measures like short-circuit protection and low-power protection, meanwhile, the LED light embedded inside the firing button indicates the various working conditions. The water transfer printing graffiti setup appearance makes it look highly recognizable from other stick pen-style starter kit.
The Fireluke 2 is the updated version of the original Fireluke M, with the X2 Mesh Coil and X3 Mesh Coil, slide to open top fill design, 360 degree eliquid feeding, 90% flax cotton & 10% cotton formula, so the Fireluke 2 offers a stylistic design and great flavor compared to all the other mesh coils and sub ohm tanks in the market.
Overall, the Freemax Twister 80W Starter Kit is a sleek, portable, and simple package for beginners who want a quick start into vaping.
Parameters
Freemax Twister Battery
Size: 24.7mmx 101.6mm
Battery: 2300mAh
Wattage Range: 5W-80W
Voltage Range: 0.5-9V
Resistance Range: 0.1ohm-3.0ohm
Power Efficiency: 95%
Thread: 510
Fireluke 2 Tank
Size: 24mm x 47.8mm
Capacity: 5ml
Material: Stainless steel/ Glass tube
Drip tip: 810 drip tip
The Joyetech ULTEX T80 Vape Kit features a mechanical tube inspired design that allows for a maximum output wattage of 80 watts and supports multiple temperature control modes. The ULTEX T80 features a stealth mode along with a preheat function for immediate satisfaction. The ULTEX T80 is powered by one high amp 18650 battery that may be charged via the micro USB charging port. A battery LED light inside the fire mechanism will flash to notify you how much voltage is left in the battery and whether or not it is time for a recharge.
In fact, the T80 can operate as a mechanical mod by putting the device into bypass mode. And, there also is a power mode, a temperature control mode with nickel, titanium & stainless steel and a TCR mode which stands for Temperature Coefficient of Resistance. TCR allows for entering the custom resistance settings for your particular coil. In temperature and TCR modes, the device can achieve 600 degrees Fahrenheit with any atomizer in the range of 0.05 to 1.5ohm.
Also included in the ULTEX T80 Kit is the Cubis Max tank. It is unique in that it works with a coil-less design that utilizes an NCFilm Heater that is much easier to clean that can be easily cleaned, has a long lifespan and makes cotton replacement an absolutely effortless process. The heating element of the NCFilm heater is constructed of Kanthal and is horizontally oriented for easy horizontal building to achieve big vapor with exquisite flavor.
The juice reservoir is not a bulb style glass, yet it can still hold up to 5ml of e-liquid. Designed with a refill system, the top cap easily slides open to expose a large fill port that you can squirt juice into. At the bottom of the top cap is also where two air inlets are located. These can be widely adjusted and, because of their location, prevent leakage.
Parameters
Size: Φ28.0*138.5mm
Battery using: single high rate 18650 cell (CDR ≥ 25A)
E-liquid capacity: 5.0ml
Heater: Joyetech NCFilmTM heater (Kanthal)
Screen: 0.49 inch OLED display
Output: 1-80W
Modes: POWER/BYPASS/TEMP(NI/TI/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode, 0.05-3.5ohm for POWER mode
Now Freemax Twister Kit and Joyetech ULTEX T80 Kit are sold on Vapesourcing for you to order one. I think they will be the best choice also in 2019.
The Freemax Twister 80W Starter Kit is a stick device, consisting of the Twister 80W variable wattage built-in battery tube mod and the Fireluke 2 mesh coil sub ohm tank. Freemax Twister 80W Starter kit is powered by 2300mah built-in battery with twist-style variable wattage function, so a simple twist of the base then you can easily switch the output wattage from 5W to 80W, the easiest way of its kind.
The Freemax Twister chip has a host of protective measures like short-circuit protection and low-power protection, meanwhile, the LED light embedded inside the firing button indicates the various working conditions. The water transfer printing graffiti setup appearance makes it look highly recognizable from other stick pen-style starter kit.
The Fireluke 2 is the updated version of the original Fireluke M, with the X2 Mesh Coil and X3 Mesh Coil, slide to open top fill design, 360 degree eliquid feeding, 90% flax cotton & 10% cotton formula, so the Fireluke 2 offers a stylistic design and great flavor compared to all the other mesh coils and sub ohm tanks in the market.
Overall, the Freemax Twister 80W Starter Kit is a sleek, portable, and simple package for beginners who want a quick start into vaping.
Parameters
Freemax Twister Battery
Size: 24.7mmx 101.6mm
Battery: 2300mAh
Wattage Range: 5W-80W
Voltage Range: 0.5-9V
Resistance Range: 0.1ohm-3.0ohm
Power Efficiency: 95%
Thread: 510
Fireluke 2 Tank
Size: 24mm x 47.8mm
Capacity: 5ml
Material: Stainless steel/ Glass tube
Drip tip: 810 drip tip
The Joyetech ULTEX T80 Vape Kit features a mechanical tube inspired design that allows for a maximum output wattage of 80 watts and supports multiple temperature control modes. The ULTEX T80 features a stealth mode along with a preheat function for immediate satisfaction. The ULTEX T80 is powered by one high amp 18650 battery that may be charged via the micro USB charging port. A battery LED light inside the fire mechanism will flash to notify you how much voltage is left in the battery and whether or not it is time for a recharge.
In fact, the T80 can operate as a mechanical mod by putting the device into bypass mode. And, there also is a power mode, a temperature control mode with nickel, titanium & stainless steel and a TCR mode which stands for Temperature Coefficient of Resistance. TCR allows for entering the custom resistance settings for your particular coil. In temperature and TCR modes, the device can achieve 600 degrees Fahrenheit with any atomizer in the range of 0.05 to 1.5ohm.
Also included in the ULTEX T80 Kit is the Cubis Max tank. It is unique in that it works with a coil-less design that utilizes an NCFilm Heater that is much easier to clean that can be easily cleaned, has a long lifespan and makes cotton replacement an absolutely effortless process. The heating element of the NCFilm heater is constructed of Kanthal and is horizontally oriented for easy horizontal building to achieve big vapor with exquisite flavor.
The juice reservoir is not a bulb style glass, yet it can still hold up to 5ml of e-liquid. Designed with a refill system, the top cap easily slides open to expose a large fill port that you can squirt juice into. At the bottom of the top cap is also where two air inlets are located. These can be widely adjusted and, because of their location, prevent leakage.
Parameters
Size: Φ28.0*138.5mm
Battery using: single high rate 18650 cell (CDR ≥ 25A)
E-liquid capacity: 5.0ml
Heater: Joyetech NCFilmTM heater (Kanthal)
Screen: 0.49 inch OLED display
Output: 1-80W
Modes: POWER/BYPASS/TEMP(NI/TI/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode, 0.05-3.5ohm for POWER mode
Now Freemax Twister Kit and Joyetech ULTEX T80 Kit are sold on Vapesourcing for you to order one. I think they will be the best choice also in 2019.
Tuesday, December 11, 2018
Which Mod For Choice? Voopoo Drag 2 Or VOOPOO DRAG 157W?
Today let's see the Voopoo Drag 2 Mod again. The Drag 2 still looks, feels and operates like the original Drag, which is a great start. This time, they’ve added a plastic lens in front of the screen, modified the magnetic battery door, updated the resin color options, changed the chip format a bit, raised the wattage limit to 177w from 157w, made the device as a whole smaller, and my favorite part, they made it more comfortable to hold, so what the similarities and difference between this two vape mods from the same manufacturer of Voopoo?
On the control face, you will see a crystal clear OLED display with a menu that displays the current battery level, mode, resistance or voltage, and wattage. The biggest highlight is that the Voopoo Drag 2 Mod is constructed with a 32 bit US GENE.FIT Chip from the world's largest provider of eCig chips.
The newest version of the well loved fast firing GENE chip – the GENE Fit. Apparently the chip is also sealed against Dust, Fire and Liquid. GENE FIT chip includes the new FIT mode – which is apparently like a set of presets I think for the UForce tanks to prevent from burn out.
The GENE.FIT Chip is dynamic and quite efficient with battery efficiency, with the addition of multiple output power adjustments such as Flavor Set, Cloud Set, and Battery Set, so you can achieve the best vaping.
Parameters
Size: 62*51*26.5mm
Material: Stainless Steel+Resin
Power Range: 5-177W
Battery: 2* 18650 Batteries ( Not Included )
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance Range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Thread: 510
Next, it's the VOOPOO DRAG 157W Vape Mod, which is a dual 18650 powered mod compatible with the VOOPOO PC App for full customization and fine tuning settings. The chassis of the DRAG made from zinc alloy and has a carbon fiber accent panel on one side and the word DRAG lightly etched into the battery access door.
The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and a firing speed of 0.025 seconds! The VOOPOO DRAG is a highly efficient variable wattage box mod with a chip efficiency rating of 95% for accurate and reliable power output.
The DRAG is compatible with the VOOPOO PC App which allows the user to customize settings and add a customized logo to the display. You can always keep the mod up-to-date with upgradeable firmware too so you will never miss anything new. The VOOPOO DRAG 157W TC Box Mod is ideal for users looking for some serious power output with minimal fire delay for that SUPER DRAG!
Parameters
Size: 90*54*24mm
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Output Power: 5-157W
Temperature Range:200-600F/100-315C
Supports 2pcs 18650 batteries ( not included )
Material: stainless steel
>> Click here to get the Voopoo drag 2 Mod kit. Want to save more, enter here to get christmas vape sales.
On the control face, you will see a crystal clear OLED display with a menu that displays the current battery level, mode, resistance or voltage, and wattage. The biggest highlight is that the Voopoo Drag 2 Mod is constructed with a 32 bit US GENE.FIT Chip from the world's largest provider of eCig chips.
The newest version of the well loved fast firing GENE chip – the GENE Fit. Apparently the chip is also sealed against Dust, Fire and Liquid. GENE FIT chip includes the new FIT mode – which is apparently like a set of presets I think for the UForce tanks to prevent from burn out.
The GENE.FIT Chip is dynamic and quite efficient with battery efficiency, with the addition of multiple output power adjustments such as Flavor Set, Cloud Set, and Battery Set, so you can achieve the best vaping.
Parameters
Size: 62*51*26.5mm
Material: Stainless Steel+Resin
Power Range: 5-177W
Battery: 2* 18650 Batteries ( Not Included )
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance Range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Thread: 510
Next, it's the VOOPOO DRAG 157W Vape Mod, which is a dual 18650 powered mod compatible with the VOOPOO PC App for full customization and fine tuning settings. The chassis of the DRAG made from zinc alloy and has a carbon fiber accent panel on one side and the word DRAG lightly etched into the battery access door.
The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and a firing speed of 0.025 seconds! The VOOPOO DRAG is a highly efficient variable wattage box mod with a chip efficiency rating of 95% for accurate and reliable power output.
The DRAG is compatible with the VOOPOO PC App which allows the user to customize settings and add a customized logo to the display. You can always keep the mod up-to-date with upgradeable firmware too so you will never miss anything new. The VOOPOO DRAG 157W TC Box Mod is ideal for users looking for some serious power output with minimal fire delay for that SUPER DRAG!
Parameters
Size: 90*54*24mm
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Output Power: 5-157W
Temperature Range:200-600F/100-315C
Supports 2pcs 18650 batteries ( not included )
Material: stainless steel
>> Click here to get the Voopoo drag 2 Mod kit. Want to save more, enter here to get christmas vape sales.
Wednesday, December 5, 2018
Geekvape LUCID Kit Matching with Jam Monster Apple For Best Flavor
If you are a fan of Geekvape, you will be excited that GeekVape company has launched their newest vape mod kit - GeekVape Lucid Kit, which consists of GeekVape Lucid Mod and GeekVape Lumi Tank with ergonomic design and compact size for easy to hold in hand. And Jam Monster Apple E-Juice will be the best choice for GeekVape Lucid Vape Kit.
Powered by the advanced AS chipset, Lucid is a compact and powerful mod that is capable of outputting a maximum power of 80W. Geekvape LUCID Kit 80W is the most compact starter kit powered by a single 18650 with OLED display screen that offers a concise and clear interface. Micro USB port is for a safe USB charging with removable battery, and it can also be used for firmware updates.
The LUMI is a 24mm pre-coiled sub ohm tank that is powered with Geekvape supermesh coil system (non-replaceable) to produce the best flavor and outstanding vapor production. The tank is built with FDA certified medical grade Polycarbonate which can withstand extremely high temperature and Stainless Steel and only weighs 16g. With the Supermesh coil system, Lumi can produce outstanding flavor and vapor production.
Parameters
Output: 80W
Mesh Coil
Resistance: 0.3ohm
Output: 30-45W
I think the best vape juice is also necessary in your daily vaping life. Today I recommend you the Jam Monster Apple E-Juice for Geekvape LUCID Kit. So do you want to have a try?
Apple Jam Monster is one of the freshest new flavors you've ever tasted. Prominent Apple Butter Jam balanced with creamy butter and toast. Jam Monster is a perfect breakfast blend you won't be able to get enough of, even in 100 ml bottles. Jam Monster is jam packed with flavor. No wonder it is a top selling e juice.
If you haven't tasted the first two flavors of Jam Monster, the reviews pretty much speak for themselves. Jam Monster is a winner and this new Apple flavor does not sway from their origins.
Parameters
Size: 100ml
Nicotine Avail: 0mg, 3mg, 6mg
So do you think Jam Monster Apple E-Juice can bring you perfect flavor when you are vaping with Geekvape LUCID Kit. Want to have a try? So please go to Vapesourcing online vape shop to get them.
Powered by the advanced AS chipset, Lucid is a compact and powerful mod that is capable of outputting a maximum power of 80W. Geekvape LUCID Kit 80W is the most compact starter kit powered by a single 18650 with OLED display screen that offers a concise and clear interface. Micro USB port is for a safe USB charging with removable battery, and it can also be used for firmware updates.
The LUMI is a 24mm pre-coiled sub ohm tank that is powered with Geekvape supermesh coil system (non-replaceable) to produce the best flavor and outstanding vapor production. The tank is built with FDA certified medical grade Polycarbonate which can withstand extremely high temperature and Stainless Steel and only weighs 16g. With the Supermesh coil system, Lumi can produce outstanding flavor and vapor production.
Parameters
Output: 80W
Mesh Coil
Resistance: 0.3ohm
Output: 30-45W
I think the best vape juice is also necessary in your daily vaping life. Today I recommend you the Jam Monster Apple E-Juice for Geekvape LUCID Kit. So do you want to have a try?
Apple Jam Monster is one of the freshest new flavors you've ever tasted. Prominent Apple Butter Jam balanced with creamy butter and toast. Jam Monster is a perfect breakfast blend you won't be able to get enough of, even in 100 ml bottles. Jam Monster is jam packed with flavor. No wonder it is a top selling e juice.
If you haven't tasted the first two flavors of Jam Monster, the reviews pretty much speak for themselves. Jam Monster is a winner and this new Apple flavor does not sway from their origins.
Parameters
Size: 100ml
Nicotine Avail: 0mg, 3mg, 6mg
So do you think Jam Monster Apple E-Juice can bring you perfect flavor when you are vaping with Geekvape LUCID Kit. Want to have a try? So please go to Vapesourcing online vape shop to get them.
Subscribe to:
Posts (Atom)